Jansen's Aircraft Systems Controls
JASC Home
JASC About Us
JASC Products
JASC Fueling Creative Solutions
JASC Inlet Guide Vane Actuator (IGVA)
JASC Services
JASC News and Events
JASC Contact Us
JASC Products
JASC Commercial Aviation
JASC Flow Dividers
JASC FMVA
JASC IGVA
JASC Pressure Regulators
JASC Single Stage Servo Valve
JASC Three Way Servo Valves
JASC Smart Metering Pumps
JASC Solenoid Valves
JASC Hypersonic Research
JASC Hyper-X Fuel Control and Ignitor Valves
JASC MFPD
JASC Single Engine Demonstrator
JASC SFX Blowdown Control Valve
JASC Rocket Propulsion
JASC Cavitating Venturi
JASC Research and Experimental
JASC ACCV
JASC Electromechanical Actuator
JASC Tech Demonstrator Pump

JASC Inlet Guide Vane Actuator (IGVA)

JASC Inlet Guide Vane Actuator (IGVA)

JASC Inlet Guide Vane Actuator (IGVA)
(click for larger image)

JASC Inlet Guide Vane Actuator Description
The IGVA features JASC's direct acting 3-way clevis type, servo valve, used for actuation, as well as an LVDT to provide position feedback. The actuator is mounted on an aircraft Auxiliary Power Unit (APU) and is used to control the position of a load compressor's inlet guide vanes. This actuator incorporates JASC's innovative direct acting clevis type valve to fueldraulically drive the actuator rod.

Benefits and Features
*Direct Acting Clevis Servo Valve
*Permanent Magnet Torque Motor
*Low Hysteresis and Threshold
*Low Electrical Power Consumption (1 Watt Maximum)
*Dry Coil Torque Motor

Construction Materials
*High Nickel-Iron Magnetic Path for Low Magnetic Hysteresis
*Aluminum Alloy Housing for lightweight
*Filled Teflon Rod Seals with Interstitial Drain
*Single Electrical Connector
*Chrome Plated Piston Rod with Rod End Bearing
*Fluorosilicone Static Seals (other seal materials available for specific applications)

Product Specifications

Temperature

Fuel: -67 ºF to 250 ºF
Ambient: -67 ºF to 392 ºF

Supply Pressure

Operating: 350-375 psid across supply and return
Supply Max: 1500 psig
Proof: 1500 psig
Burst: 2250 psig

Rod Force/No Load Slew Rate/Max. Flow:
150 lbs.
5 in/sec.
2.5 GPM
Leakage

External: None
Internal: 0.3 gpm max at 175 psid from P to C and from C to R ports.

Weight

4.0 lbs max.

Integral Filtration

10 micron nominal, 25 micron absolute at the –06 supply and return ports

Electrical Characteristics

Servo:

Input Current: 0-100 mA
Input Voltage: 0-15 VDC
Resistance: 75 ± 15 ohms at 70 ºF
Threshold: 0.2 mA

LVDT:

Voltage: 3.535 VRMS ± 5%
Frequency: 3000 ± 20 HZ
Wave Form: Sine
Apparent Power: .027 VA max.
Input Impedance: 500 ohms min.
Output Impedance: 150 ohms max.
Phasing: With the black and blue leads common, red shall be in phase with yellow as the LVDT is extended past null.

Dielectric: 1060 ± 10 VRMS at 60 Hz

Insulation Resistance: 40 meg ohms min. at 500 ± 10 vdc

Bonding: 10 milliohms max.

 

JASC Site Map
JASC All Rights Reserved